Conduction, Convection and Radiation: How Thermal Energy Moves
Explain the three ways thermal energy moves using particles and waves, see why matt black surfaces emit and absorb best, and use the ideas to explain vacuum flasks, double glazing and loft insulation.
Published · 8 min read
On this page
Thermal energy always spreads from hotter places to cooler ones. It can do this in three ways:
- Conduction: energy passes through a material from particle to particle, while the material stays where it is. It is the main method in solids. In metals, free electrons speed it up.
- Convection: a warm liquid or gas moves and carries its energy with it. It happens because warming a fluid makes it less dense, so it rises.
- Radiation: every object gives out infrared waves, and hotter ones give out more. These need no material at all, which is how the Sun's energy crosses empty space to reach the Earth.
Most real situations involve more than one method. A pan of rice on a gas stove gains energy by conduction through its base, the water inside circulates by convection, and the cook's face feels the radiation from the flame.
How does conduction work?
Heat one end of a metal spoon. The particles at that end gain energy and vibrate more strongly. They jostle their neighbours, which start vibrating more too, and the extra energy is passed along the spoon. In a non-metal, such as glass or wood, these lattice vibrations are the only way energy is conducted, and they are slow.
Metals conduct much faster because they contain free electrons (also called delocalised electrons). These are not tied to any one atom. Near the hot end, they gain kinetic energy, dart through the metal, and hand that energy on when they collide with ions further along. The same free electrons carry electric currents, which is why good electrical conductors such as copper and aluminium are usually good thermal conductors as well.
Gases are very poor conductors. Their particles are far apart, so collisions are rare. Most liquids are poor conductors too. Materials that trap still air in tiny pockets, such as wool, feathers and plastic foam, are therefore excellent insulators.
A material's thermal conductivity tells you how well it conducts. The higher it is, the faster energy is conducted through a given thickness.
Worked explanation 1: the cold metal bench
On a frosty morning in a park in Seoul, a metal bench and a wooden bench have both been outdoors all night, so they are at the same temperature. Why does the metal one feel much colder to sit on?
Key idea: your skin senses how fast it loses energy, not the temperature of the bench.
Explanation: both benches are colder than you, so energy flows from your body into them. Metal has a much higher thermal conductivity than wood. It carries energy away from the contact area quickly, so your skin cools fast and feels cold. Wood conducts so slowly that the surface under you soon warms to nearly skin temperature, and the energy flow almost stops.
To compare conductors in the lab, fix a paper clip with a dab of wax to the end of rods of different metals, all the same length and thickness, and heat their other ends equally. The clip on the copper rod drops off first, because heat travels along copper fastest; the poorer the conductor, the later its clip falls, and a glass rod may never drop its clip at all.
How does convection work?
Put a pan of cold water on a stove. The water at the bottom warms first. Its particles move faster and spread slightly further apart, so the warm water expands and becomes less dense. Being less dense, it rises. Cooler, denser water from above sinks to take its place, warms up, and rises in turn. This loop of moving fluid is a convection current.
Convection needs particles that are free to move, so it happens in liquids and gases but never in solids. You can see it by dropping a single crystal of potassium permanganate into a beaker of water, near the edge, and gently heating beneath it. Purple streaks rise above the flame, spread across the top and sink on the far side. Handle the crystal with tweezers and wear eye protection: potassium permanganate stains skin and clothes and irritates the eyes.
Everyday examples:
- Room heating. A radiator warms the air next to it, which rises to the ceiling, drifts across the room and sinks as it cools.
- Sea breezes. On a sunny day in Karachi, the land warms faster than the Arabian Sea. The air above the hot ground expands and rises, so denser air from over the sea is drawn inland beneath it. At night the land cools faster, and the breeze reverses.
- Thermals. Eagles hold their wings still and spiral upwards on columns of rising warm air, and gliders use the same columns to gain height.
Worked explanation 2: why the freezer box sits at the top
In many older fridges, the freezer compartment is at the top. Explain why this cools the whole fridge.
Key idea: cold air is denser than warm air.
Explanation: air next to the freezer box cools, contracts and becomes denser, so it sinks to the bottom of the fridge. Warmer air below is pushed upwards towards the freezer box, where it cools and sinks in turn. A convection current keeps circulating, so the whole fridge cools. A freezer box at the bottom would just sit in a pool of cold air.
How does thermal radiation work?
Every object emits infrared radiation, whatever its temperature. The hotter the object, the more infrared it gives out each second. A larger surface area also emits more. Infrared is an electromagnetic wave, like light, so it travels at the speed of light and needs no medium. When it strikes a surface, it can be absorbed, which warms the surface, or reflected or passed through.
Compare how fast an object takes in radiation with how fast it gives it out. If it takes in more each second, it warms up. If it gives out more, it cools down. When the two rates match, its temperature holds steady.
Which surfaces are the best emitters and absorbers?
Surface colour and texture make a big difference:
- Matt (dull) black surfaces are the best emitters and the best absorbers of infrared.
- Shiny silver surfaces are the poorest emitters and absorbers, and the best reflectors.
- White surfaces reflect most sunlight, so they absorb far less of it than black ones.
- A good absorber is always a good emitter.
The classic test uses a Leslie cube: a hollow metal cube whose four sides have different finishes, for example matt black, shiny black, matt white and shiny silver. Fill it with hot water so every face is at the same temperature. Point an infrared detector at each face in turn, from the same distance. The matt black face gives the highest reading and the shiny silver face the lowest.
This is why solar water heaters on rooftops in Cyprus are painted matt black, why the cooling grid on the back of a fridge is black, and why houses in many hot countries are painted white.
How do we reduce unwanted energy transfer?
Insulation slows energy transfer down. It never stops it completely.
- Vacuum flask. Two glass walls with a vacuum between them stop conduction and convection across the gap, since a vacuum has no particles. The walls are silvered on the sides facing the vacuum, which cuts radiation. A hollow plastic stopper reduces conduction, and blocks convection and evaporation from the top. It keeps cold drinks cold for the same reasons.
- Double glazing. Two panes of glass hold a thin layer of air or argon between them. Gases conduct poorly, and the gap is narrow enough to keep convection currents weak.
- Loft insulation. Warm air rises to the top of a house. A thick layer of mineral wool on the loft floor traps air in small pockets, so it cannot conduct well or circulate.
- Thicker walls, and walls built from materials with a lower thermal conductivity, make a building cool more slowly.
You can explore all three methods in the heat transfer simulation, and insulation in the insulation and cooling simulation.
Common mistakes
- Writing "heat rises". Warm fluid rises because it is less dense. Energy itself can move in any direction.
- Saying the particles get bigger when a fluid warms. They move further apart; they do not grow.
- Saying cold flows in. Energy flows from hot to cold, never the reverse.
- Claiming radiation needs air. Infrared crosses a vacuum perfectly well.
- Mixing up emitters and reflectors. Shiny surfaces reflect well, so they emit and absorb poorly.
- Saying convection happens in solids. The particles in a solid cannot flow.
Key points
- Conduction passes energy through a material by particle vibrations and, in metals, by free electrons.
- Convection is the movement of a warm, less dense fluid, forming a convection current.
- Thermal radiation is infrared, which all objects emit and which needs no medium.
- Matt black surfaces are the best emitters and absorbers; shiny silver ones are the poorest.
- Trapped air, vacuums and shiny surfaces slow energy transfer in flasks, windows and lofts.
- Insulation slows the transfer of thermal energy but cannot stop it.